新疆某铜矿的浮选实验

    Flotation Technology Test of Refractory Copper Ore in Xinjiang

    • 摘要: 这是一篇矿物加工工程领域的论文。新疆某铜矿石中矿物组成复杂、属于复杂难选氧化铜矿。矿石中硫化铜占总铜的35.67%,游离氧化铜和结合氧化铜占总铜的64.33%。脉石矿物种类多且与目标矿物之间嵌布关系复杂。采用先浮硫化铜矿物,再浮氧化铜矿物的原则流程进行了选矿工艺技术条件研究。针对该矿石性质,开展浮选条件实验,获得较佳工艺参数,磨矿细度-0.074 mm 65%,石灰用量为2500 g/t、捕收剂Z-200用量为100 g/t、硫化钠用量为1750 g/t、硫酸铵用量为550 g/t、戊基钠黄药用量为160 g/t。在较佳磨矿细度和药剂用量下,开展闭路浮选实验,闭路流程可以获得硫化铜精矿和氧化铜精矿两种产品,其混合铜精矿中Cu的品位为25.59%,Ag的品位为507.27 g/t,铜回收率为73.07%,银总回收率为70.27%。本研究为该氧化铜矿资源的高效利用提供了技术支撑。

       

      Abstract: This is an essay in the field of mineral processing. Copper ore in Xinjiang was refractory oxidized copper ore,of which the mineral composition was complex. In the ore copper sulfide accounts for 35.97% of the total copper, free copper oxide and combined copper oxide account for 64.03%. There were many gangue minerals, the intercalation of useful minerals and gangue minerals was complex. The technical conditions of mineral processing were studied by the principle flow of flotation copper sulfide minerals and then copper oxide minerals. According to the properties of the ore, a flotation condition test was carried out to obtain the best process parameters. And the optimum process parameters that grinding fineness -0.074 mm accounted for 65%, the amount of lime was 2500 g/t, the amount of collector Z-200 was 100 g/t, the amount of sodium sulfide was 1750 g/t, the amount of ammonium sulfate was 550 g/t, the amount of sodium amyl xanthate was 160 g/t were obtained. When the grinding fineness was -74 μm 65% and the best pharmaceutical system was adopted, two kinds of copper sulfide concentrate and copper oxide concentrate can be obtained by closed circuit process. The Mixed copper concentrate with copper grade of 25.59%,silver grade of 507.27 g/t,and copper recovery ratio of 73.07%, silver recovery ratio of 70.27% was obtained. The efficient utilization of copper oxide resources was provided by this study.

       

    /

    返回文章
    返回