钢渣矿粉煤矸石混合料的路用性能

    Mechanical Properties of Gangue-steel Slag-ore Powder Mixture

    • 摘要: 为了探究无碱激发剂的钢渣矿粉煤矸石混合料的力学性能,以邯郸地区产出的固废类材料煤矸石、钢渣和矿粉为研究对象,进行混合料力学性能实验研究,实验表明, 混合料力学性能良好,具有较高的工程应用价值。利用Minitab建立回归分析模型,得到掺合料的相对掺量与力学性能间的回归方程,方程可以有效揭示目标强度值和相对掺量间的关系,可根据工程实际提供混合料配合比。利用XRD和SEM测试手段,分析混合料在无碱激发剂环境下的强度形成机理,对试样物相组成和微观结构进行分析研究,结果表明,该混合料的三种掺合料,可以生成大量相互搭接且结构致密的凝胶材料,使该混合料具有良好的力学性能。

       

      Abstract: In order to explore the mechanical properties of the coal gangue-steel slag-ore powder mixture without alkali initiator, the solid waste materials coal gangue, steel slag and mineral powder produced in Handan Area were taken as the research objects, and the mechanical properties of the mixture were studied, and the test showed that the mixture had good mechanical properties and high engineering application value. The regression analysis model is established by Minitab to obtain the relative content and the regression equation between the admixtures, which can effectively reveal the relationship between the target strength value and the relative adhesion, and can provide the mixture ratio according to the actual project. XRD and SEM test methods were used to analyze the strength formation mechanism of the mixture in the alkali-free stimulant environment, and the phase composition and microstructure of the sample were analyzed and studied, and the results showed that the three admixtures of the mixture could generate a large number of overlapped and densely structured gel materials, so that the mixture had good mechanical properties.

       

    /

    返回文章
    返回